Interpretation of the misconception that pulse punching machines are more expensive than constant temperature pressing machines

There are currently two types of press machines on the market: press machines that use pulse heating, known as pulse stamping press machines; A press machine that uses constant temperature heating is called a constant temperature press machine.

Many people believe that pulse press machines are more expensive and better than constant temperature press machines. However, this is just a misconception. To overcome this misconception, we need to start with the composition of the press machine.

A typical press machine consists of the following parts: (1) press head heating mechanism, (2) camera focusing mechanism, (3) camera and lens, (4) press head movement mechanism, (5) press head temperature control component, (6) LCD glass fixing mechanism, (7) mobile phone cable fixing mechanism, (8) silicone rubber winding mechanism, (9) motion controller, (10) display, etc.

In the above components, there are two heating methods for the pressure head: pulse and constant temperature. In terms of production cost, pulse is indeed more expensive than constant temperature. In terms of usage, pulses have the advantage of heating up and cooling down faster than constant temperature heating. However, the actual situation is that the pressure head used for pulse is relatively thin, with large temperature errors and difficult temperature control. The pressed wire is prone to rebound, while constant temperature is a mature technology with high temperature control accuracy and relatively high yield of pressed wire.

So, if the heating method of the pressure head heating mechanism is different for a press machine, and the above (2) to (10) are all the same, then the pulse press press machine is more expensive than the constant temperature press machine. However, the fact is exactly the opposite. Many manufacturers, in order to maximize profits, use some inferior components for the pressure head part, and even omit some mechanisms for the other (2) to (10) mechanisms. They can only rely on manual labor by users to complete most of the work, such as manual focusing, manual wire alignment, manual rolling of silicone rubber, etc. The reason why the constant temperature press machine is now more expensive than the inverse pulse is that, for example, the constant temperature press machine produced by Shenzhen Hairui Si has a lower cost for the constant temperature heating part, and other mechanisms use better materials or add some auxiliary mechanisms that can improve the degree of automation. In addition, it solves the problem of rapid cooling of the pressure head, so it is more expensive, but more convenient to use. Mobile phone compression quality is more guaranteed